Fasteners, Pipe Fittings, Hydraulic & Pneumatic Fittings, Locking Assecsories, Transmission Items, Machine Tools, Mumbai, India
 
Circlips, Circlips Manufacturer, Circlips Manufacturer Exporter, Snap Rings, Dowel Pins, Mumbai, India
Click to View Certificate
   
   
      ∙ Fasteners
     ∙ Locking Accessories
     ∙ Pipe Fittings & Flanges  
    ∙ Hydraulic & PneumaticFittings
    ∙ Transmission Items
    ∙ Machine Tools
    ∙ Mechanical Anchoring Systems
UHS - Universal Hybrid Anchors SS KUN - 80 Special Stainless Steel
PRODUCT CODE PRODUCT DESCRIPTION ANCHOR EMBEDMENT DEPTH HOLE DIA HOLE DEPTH FASTENABLE THICKNESS MAX. APPLIED TORQUE BOX QTY.
DIA LENGTH STANDARD STANDARD STANDARD    
  Type mm mm mm mm mm mm Nm Nos
UHSM690SS UHS M6×90/60 6 90 60 6 65 30 15 100
UHSM8105SS UHS M8×105/70 8 105 70 8 80 35 25 50
UHSM10125SS UHS M10×125/85 10 125 85 10 90 40 25 50
UHSM12145SS UHS M12×145/100 12 145 100 12 110 45 40 25
UHSM16175SS UHS M16×175/125 16 175 125 16 140 50 60 20
UHSM20200SS UHS M20×200/150 20 200 150 20 220 50 60 10
TECHNICAL DATA SHEET
 Mechanical properties of UHS - Universal Hybrid Anchors SS KUN - 80 Special Stainless Steel
  Units of
Measurement
SS KUN - 80
  M6 M8 M10 M12 M16 M20
Nominal Tensile Strength [N/mm²] 840 840 840 840 840 840
Yield Strength [N/mm²] 660 660 660 660 660 660
Stressed Cross Section [mm²] 20.1 36.6 58.0 81.3 157.0 245.0
Breaking Torque [Nm] 13 35 70 110 300 540
Char, Bending Resistance [Nm] 10 30 60 106 270 490
Setting Details of UHS - Universal Hybrid Anchors SS KUN - 80 Special Stainless Steel
  Standard Embedment Depth
  Units of
Measurement
M6 M8 M10 M12 M16 M20
Nominal diameter of drill bit [mm] 6 8 10 12 16 20
Cutting diameter of drill bit [mm] 6.45 8.45 10.45 12.50 16.50 20.50
Depth of drill hole [mm] 65 80 90 110 140 160
Diameter of clearence hole in the fixture [mm] 6.50 8.50 10.50 12.50 16.50 20.50
Effective anchorge depth [mm] 60 70 80 100 125 150
Torque moment [Wm] 10 26 56 96 230 480
Width across [mm] 4.0 5.5 7.0 8.0 11.1 15.0
Setting Parameters
UHS - Universal Hybrid Anchors SS KUN - 80 Special Stainless Steel
  Standard Embedment
  Units of
Measurement
M6 M8 M10 M12 M16 M20
Minimum base material thickness [mm] 100 125 125 140 160 200
Minimum spacing in cracked concrete [mm] 50 60 80 90 120 140
Minimum spacing in non-cracked concrete [mm] 50 60 80 90 120 140
Minimum edge distance in cracked concrete [mm] 50 60 80 90 120 140
Minimum edge distance in non-cracked concrete [mm] 50 60 80 90 120 140
Critical spacing for splitting failure and concrete cone failure [mm] 130 150 170 220 270 340
  [mm] 130 150 170 220 270 340
BACK NEXT